Hurron proupdates

PDF Instruction

Hurron Pro Signature

User manual
Download instruction

Edogdata update

Hurron Pro Signature

Edogdata
Download edogdata

Firmware update

Hurron Pro Signature

Latest firmware version
Download updates

manualFirmware update

In order to update the device firmware, you must perform the following steps:

Before you start installing new firmware, you must start the device, then in the standby mode, press the MENU button. After that, select the SOWFTWARE VERSION and write down the firmware number that is currently installed.

STEP 1
Download the current file from the official website Hurron.com. After downloading there will be a file called PRO SIGNATURE.bin.
1
STEP 2
Insert the memory card into the computer.
2
STEP 3
Format the memory card using standard tools of your operating system.
3
STEP 4
Copy the PRO SIGNATURE.bin file to the memory card. Insert the memory card into the device and launch it.
4
STEP 5
After launch, the device will automatically detect the new firmware and prompt you to perform the update.
5
STEP 6
After that, the display will show that the firmware is being updated. Upon completion, the display will indicate that the update has been completed.
6
STEP 7
After updating the firmware, you must reboot the device. The system will also detect the update file and prompt you for the installation. This time you need to cancel the update. Further in the standby mode, you must press the MENU button. After that, select the SOFTWARE VERSION and compare the firmware number with the number you wrote down before the update started. If the numbers are different, the update was successful. The memory card must be rearranged to the computer and the PRO SIGNATURE.bin file must be deleted from it. If the numbers are matching, then you need to repeat the update process. It is strictly forbidden to change the name of the firmware file.
7